Skin-like electronics research aiming to mimic even surpass human-like specific tactile cognition by operating perception-to-cognition-to-feedback of stimulus to build intelligent cognition systems for certain imperceptible or inappreciable signals was so attractive. Herein, we constructed an all-in-one wearable device to address the sensitivity and power supply simultaneously by integrating multistage micro-structured ionic skin (MM i-skin) and piezoelectric & thermoelectric dual-mode self-power staffs. The MM i-skin with multi-stage “interlocked” configurations achieved precise recognition of subtle signals, where the sensitivity reached up to 77.4 kPa-1, as well as response time of 46 ms, cyclic stability (over 1500 cycles), and a pressure detection limit (over 50 kPa). Furthermore, we developed a piezo/thermo-electricity dual-mode nanogenerator, denoted as P-iskin / T-iskin, for self-powering the pressure sensor. This self-powered multifunctional ionic skin enables real-time monitoring of weak body signals, rehab guidance, and robotic motion recognition, demonstrating potential for internet of things (IoT) applications involving the artificial intelligence-motivated sapiential healthcare internet (SHI) and widely distributed human-machine interaction (HMI).

Zinc metal anodes are gaining popularity in aqueous electrochemical energy storage systems for their high safety, cost-effectiveness, and high capacity. However, the service life of zinc metal anodes is severely constrained by critical challenges, including dendrites, water-induced hydrogen evolution, and passivation. In this study, a protective two-dimensional metal-organic framework interphase is in situ constructed on the zinc anode surface with a novel gel vapor deposition method. The ultrathin interphase layer (~1 µm) is made of layer-stacking 2D nanosheets with angstrom-level pores of around 2.1 Å, which serves as an ion sieve to reject large solvent-ion pairs while homogenizes the transport of partially desolvated zinc ions, contributing to a uniform and highly reversible zinc deposition. With the shielding of the interphase layer, an ultra-stable zinc plating/stripping is achieved in symmetric cells with cycling over 1000 h at 0.5 mA cm-2 and ~700 h at 1 mA cm-2, far exceeding that of the bare zinc anodes (250 and 70 h). Furthermore, as a proof-of-concept demonstration, the full cell paired with MnO2 cathode demonstrates improved rate performances and stable cycling (1200 cycles at 1 A g-1). This work provides fresh insights into interphase design to promote the performance of zinc metal anodes.

High-capacity nickel-rich layered oxides are promising cathode materials for high-energy-density lithium batteries. However, the poor structural stability and severe side reactions at the electrode/electrolyte interface result in unsatisfactory cycle performance. Herein, the thin layer of two-dimensional (2D) graphitic carbon-nitride (g-C3N4) is uniformly coated on the LiNi0.8Co0.1Mn0.1O2 (denoted as NCM811@CN) using a facile chemical vaporization-assisted synthesis method. As an ideal protective layer, the g-C3N4 layer effectively avoids direct contact between the NCM811 cathode and the electrolyte, preventing harmful side reactions and inhibiting secondary crystal cracking. Moreover, the unique nano-pore structure and abundant nitrogen vacancy edges in g-C3N4 facilitate the adsorption and diffusion of lithium ions, which enhances the lithium deintercalation/intercalation kinetics of the NCM811 cathode. As a result, the NCM811@CN-3wt% cathode exhibits 161.3 mAh g-1 and capacity retention of 84.6% at 0.5 C and 55 °C after 400 cycles and 95.7 mAh g-1 at 10 C, which is greatly superior to the uncoated NCM811 (i.e. 129.3 mAh g-1 and capacity retention of 67.4% at 0.5 C and 55 °C after 220 cycles and 28.8 mAh g-1 at 10 C). The improved cycle performance of the NCM811@CN-3wt% cathode is also applicable to solid-liquid-hybrid cells composed of PVDF:LLZTO electrolyte membranes, which show 163.8 mAh g-1 and the capacity retention of 88.1% at 0.1 C and 30 °C after 200 cycles and 95.3 mAh g-1 at 1 C.